螺栓
螺柱
螺钉
螺母
焊接螺丝
自攻/木螺钉
垫圈
挡圈
销
铆接件
组合件
工具和其他紧固件
CNS 9073-1996
重型皿形弹簧
Heavy disc Springs
PN 82006
倒角平垫圈
Plain washers, chamfered-Normal series
PN 82005
平垫圈
Plain washers-Normal series
PN 82418
T型方颈螺栓
T-head bolts with square neck bolts
CNS 9988-1983
A1型汽车用光制垫圈
Type A1 Finishing washers for automobiles
A2型汽车用光制小垫圈
Type A2 Finishing small washers for automobiles
B1型汽车用光制垫圈
Type B1 Finishing washers for automobiles
B2型汽车用光制小垫圈
Type B2 Finishing small washers for automobiles
PN 82271
开槽无头螺钉
Slotted headless screws
MS 3498C-1987
开槽盘头不脱出螺钉、压铆螺母和螺套组合(L=0.563)
Slotted pan head screws with waisted shank、clinching nut and wire thread inserts assemblies,L=0.563
CNS 10421-1983
管夹(d1=5.1mm)
Clamp, loop-steel, plain and cushioned,d1=5.1mm
MS 3498C-1996
MS 3498C-1998
管夹(d1=7.1mm)
Clamp, loop-steel, plain and cushioned,d1=7.1mm
管夹(d1=8.7mm)
Clamp, loop-steel, plain and cushioned,d1=8.7mm
管夹(d1=10.3mm)
Clamp, loop-steel, plain and cushioned,d1=10.3mm
GB 894-1976
轴用弹性挡圈(d≤10mm)
Retaining rings for shaft，d≤10mm
PN 82276
开槽柱端紧定螺钉
Slotted set screws with dog point
十字槽盘头不脱出螺钉、压铆螺母和螺套组合(L=0.563)
Cross recessed pan head screws with waisted shank、clinching nut and wire thread inserts assemblies,L=0.563
1万5千+标准收录，涵盖18个国家地区，15个行业标准
数据由华人螺丝网 华网紧固云友情提供--合作联系：fastencloud@luosi.com
